Welcome to our new online store !

Alfresco Timber Oil By Gilly's - 250ml

  • BrandGilly's

Description

A tung oil based finish for outdoor timber and furniture.  It has added UV protection to battle the harsh sunlight we receive in Australia! With that said, it is best used for timber that is protected, eg. under alfresco, shade cloth and verandas.

The formula is built around natural oils such as tung oil which helps to seal timber and protects it from water damage and other wear. It is a great product to seal and finish new timber, but also to revive older timber that is looking dry and worn.

This oil contains no lacquer or silicon, unlike many products on the market, which means easier maintenance for you and a beautiful natural finish.

Used For: Alfresco timber & furniture, timber trims & frames, outdoor tables, window sills & more.

Surface Area: will cover approx. 10-12 square metres of surface

 


--








Surface Preparation  Ensure the surface is clean and dry before application. D-limonene (natural citrus solvent) or a turpentine can be used for a vigorous clean. For a lighter clean, you can use an all purpose cleaner.

If there is any oil, wax, grease, dirt or similar residue on the surface, it may affect the tung oil's ability to cure - so a thorough clean is important.









How to Apply               

  1. Rub or brush oil into the timber. Lighter coats are better.

  2. On first coat, let it sit for 5 minutes after applying. Wipe on more oil to areas that become dull, as the oil soaks in.

  3. After 5 more minutes, wipe off any excess oil with another clean cloth and rub it back vigorously.

  4. Follow this procedure for each coat. Note: Some people prefer to wet sand between coats, however this is generally only for timber that is quite porous.                                                                

  5. Apply 3 coats.  Best to wait 24 hours between coats (curing time can be up to 30 days). Apply more coats if desired or necessary.

  6. Hang out any rags or soak in water, rather than leaving scrunched up, as there is the potential for combustion.










Dry Time                        24 hours to dry between coats. As this is tung oil based, it can take 4 weeks to completely cure. Light usage is however perfectly fine within this time.








Maintenance                    This product is built from natural oils, in particular tung oil. This makes for a beautiful natural finish. If you do find the finish gets scratched or damaged, you can simply reapply following the
same steps outlined above. There is no need to sand it back as you would have to do with lacquers, varnishes and silicon based products.For general maintenance and wear, you can assess as you see fit.  We would recommend reapplying a light 1-2 coats every 6-12 months to keep your timber looking fresh!








Clean Up                            D-Limonene or mineral turpentine.

 

Downloads: Product Data Sheet

Alfresco Timber Oil By Gilly's - 250ml

  • BrandGilly's
Product form

Free pick up in our store

$33.00 incl. GST

Trade Account customers, log in to view trade prices

  • In Stock
  • Click & Collect From Our Trademaster Warehouse @ 46-52 Ferndell St, South Granville 2142, Sydney NSW, Australia
  • Delivery to the Sydney Metro Region starting from $9.90
  • Shipping Options Australia wide, calculated at the checkout. Live rates calculated according to destination, order weight & dimensions

Description

A tung oil based finish for outdoor timber and furniture.  It has added UV protection to battle the harsh sunlight we receive in Australia! With that said, it is best used for timber that is protected, eg. under alfresco, shade cloth and verandas.

The formula is built around natural oils such as tung oil which helps to seal timber and protects it from water damage and other wear. It is a great product to seal and finish new timber, but also to revive older timber that is looking dry and worn.

This oil contains no lacquer or silicon, unlike many products on the market, which means easier maintenance for you and a beautiful natural finish.

Used For: Alfresco timber & furniture, timber trims & frames, outdoor tables, window sills & more.

Surface Area: will cover approx. 10-12 square metres of surface

 


--








Surface Preparation  Ensure the surface is clean and dry before application. D-limonene (natural citrus solvent) or a turpentine can be used for a vigorous clean. For a lighter clean, you can use an all purpose cleaner.

If there is any oil, wax, grease, dirt or similar residue on the surface, it may affect the tung oil's ability to cure - so a thorough clean is important.









How to Apply               

  1. Rub or brush oil into the timber. Lighter coats are better.

  2. On first coat, let it sit for 5 minutes after applying. Wipe on more oil to areas that become dull, as the oil soaks in.

  3. After 5 more minutes, wipe off any excess oil with another clean cloth and rub it back vigorously.

  4. Follow this procedure for each coat. Note: Some people prefer to wet sand between coats, however this is generally only for timber that is quite porous.                                                                

  5. Apply 3 coats.  Best to wait 24 hours between coats (curing time can be up to 30 days). Apply more coats if desired or necessary.

  6. Hang out any rags or soak in water, rather than leaving scrunched up, as there is the potential for combustion.










Dry Time                        24 hours to dry between coats. As this is tung oil based, it can take 4 weeks to completely cure. Light usage is however perfectly fine within this time.








Maintenance                    This product is built from natural oils, in particular tung oil. This makes for a beautiful natural finish. If you do find the finish gets scratched or damaged, you can simply reapply following the
same steps outlined above. There is no need to sand it back as you would have to do with lacquers, varnishes and silicon based products.For general maintenance and wear, you can assess as you see fit.  We would recommend reapplying a light 1-2 coats every 6-12 months to keep your timber looking fresh!








Clean Up                            D-Limonene or mineral turpentine.

 

Downloads: Product Data Sheet

Buying information

Icon for truckWhat are your Shipping options ?

We offer Shipping Australia wide on the majority of our products: See our shipping options below:

  • Hardware & Small Products: packaged in boxes and shipped Australia wide. Flat Rates listed at the checkout.
  • Wood Panels & Large Products: packaged on pallets and shipped Australia wide. Live Shipping Rates calculated at the checkout.
  • Sydney Metro Region: Shipping Rates listed at the checkout starting from $9.90, according to the product type and size.
  • Outer Sydney: Live Shipping Rates calculated at the checkout, delivering to NSW, ACT, VIC, QLD, NT, WA & TAS. We used 3rd party couriers such as TNT, Couriers Please and Northline to deliver large and small products Australia wide.
Icon for delivery_box_1Do you stock all of the products listed on your website ?

The majority of the products listed on our website are noted as “In Stock” and are available at our South Granville Sydney warehouse, ready for pick up or delivery. We stock thousands of sheets of Plywood, MDF, Laminate Benchtops, Particleboard, Hardware and other products, all under our warehouse. This is the benefit of choosing Trademaster.

Very few products may be listed as “OUT OF STOCK”  or by “Special Order”, and are generally listed online as such. If you cannot select a product or add it to cart, this means it is out of stock.

If the note “Variation Not Available” is shown, this means the product is not available in the specific combination you have selected.

Icon for shopping_bagCan we buy online & pick up directly from your South Granville store?

Yes. Most of our large product orders are picked up directly from our store located @ 46-52 Ferndell St, South Granville 2142, Sydney NSW. Our on the spot loading service is fast and convenient with forklift assistance available. If your vehicle cannot be loaded with a forklift, you are expected to hand load your own materials into your vehicle.

We also have sufficient space and parking on site for trucks, trailers and other large vehicles.

Pick Up Hours
Monday-Thursday: 7am – 3:30pm | Saturday: 7am – 1pm

Special Friday Pick-up Hours
Friday: 7am – 11am
Friday: closed between: 11am – 1pm
Friday: re-open: 1pm – 3:30pm

Icon for coinDo the prices on your website include GST ?

Yes, the prices shown on all of our listed products on this website all include GST. If you proceed with an order, we will issue you with a Tax Invoice and you may wish to put your business name on the invoice or otherwise a personal name is sufficient.

Icon for groupDo you have a showroom to view products and collect samples?

Yes. Our showroom is located at our main site: 46-52 Ferndell St South Granville 2142, Sydney NSW. Please park in the customer parking, and enter the main Showroom/Retail Store on the right hand side.

We have the full range of Laminex & Formica Colours, Plywood, Laminate Benchtops, Reflections Splashbacks, Flat Pack Kitchens, Hardware, Appliances, Wardrobes, Windows and Doors on display at our newly renovated showroom.

Colour sample chips for Laminex, Formica and Laminate Benchtops are free to collect and are generally 70x50mm in size. All are welcome into our showroom during opening hours.

Retail Login

Forgot your password?

Don't have a profile yet?
Create profile